ADC AVIDIA SWD4573I1 - Manual (Page 200)

Configuring PVCCs
174 Avidia System Configuration and Management User Manual
Parameter
The PVCC Table row index number of the primary PVCC for which you want to switch
traffic from the backup PVCC back to the primary PVCC.
Example
::pvcc=> restore 3
Changing Cell Channel Card PVCC Admin Status
1 From the ::pvcc=> prompt, type show then press to display the configured
parameters for all PVCCs.
2 Note the index number of the PVCC for which you want to change the status.
3 Type the admin command in the following format then press .
admin (up|down)
Parameters
The index number of the PVCC you want to activate or deactivate.
(up|down)
Type up to activate the PVCC. Type down to deactivate the PVCC.
Example
::pvcc=> admin 2 up
ENTER
ENTER