Spectra Precision Survey Pro v4.9 - Manual (Page 85)

scale bars will also switch between angles or distances. The scales in the scale bars are calculated using the last
distance that was measured.
Foresight Card
[Survey] [Remote Control] [Foresight]
The Foresight card is available only if the backsight is solved. It displays live coordinates for the current foresight.
Turn To
[Survey] [Remote Control] [Turn To]
The Turn To screen is used to turn a robotic total station to a specified horizontal and zenith angle, or to a specified
point.
Horizontal Angle: The horizontal angle that the total station will turn to.
Zenith Angle: The zenith angle that the total station will turn to.
[Turn to Angles]: Turns the total station to the specified horizontal and zenith angles.
Existing Point: The point from the current job that the total station will turn to.
[Turn to Point]: Turns the total station to the specified point.
[Turn to Backsight]: Turns the total station to the backsight point.
[Flip]: Quickly rotates the total station from face one to face two, or vice versa.
Sky Plot
[Survey] [Remote Control] [ ] [Sky Plot]
The Sky Plot screen displays the relative location of the visible satellites in the sky, as well as if they are being used to
calculate a position.
Satellites with a usable signal are shown with red flashing indicators.
The Elevation Mask is the minimum angle above the horizon where locked satellites are used for a solution. This area
is indicated on the screen by the inner circle.
GeoLock Settings
[Survey] [Remote Control] [ ] [Settings]
or [Job] [Settings] [Instrument] [GeoLock]
The GeoLock Settings screen is used to enable/disable GeoLock and displays the current setting of the NMEA GPS
85