Spectra Precision Survey Pro v4.9 - Manual (Page 213)

Edit Template
[Roads] [Edit Templates] [Edit…]
or [Roads] [Edit Templates] [New…]
The Edit Template screen is identical to the New Template screen and is used to create a new template or edit an
existing one.
All of the segments of the current template are listed in the screen. The list shows the name of each segment, the
horizontal and vertical offsets (lengths), and the slope.
Note: The length of the first segment must be greater than zero.
Cut Slope: is the slope that will be used when locating the catch point in a situation where the existing terrain is above
the level of the hinge point.
Fill Slope: is the slope that will be used when locating the catch point in a situation where the existing terrain is below
the level of the hinge point.
[Insert…]: opens the Edit Segment screen where a new segment will be added prior to (above) the segment selected in
the Edit Template screen.
Note: To add a segment to the end of all existing segments (furthest away from the centerline), be sure is
selected from the Edit Template screen prior to tapping [Insert…].
[Edit…]: opens the Edit Segment screen where the details of the selected segment can be edited.
Note: The selected segment is shown with a thicker line in the map view in the lower portion of the Edit Template
screen.
[Remove]: removes the selected segment and automatically joins the previous segments to the following segments.
Note: When a segment is removed the existing segments toward the centerline will not change. Only those on the side
of the removed segment away from the centerline are adjusted.
Edit Segment
[Roads] [Edit Templates] [Edit…] [Insert…]
or [Roads] [Edit Templates] [Edit…] [Edit…]
or [Roads] [Edit Templates] [New…] [Insert…]
The Edit Segment screen is identical to the New Template screen and is used to create a new template or edit an
existing one.
Segment Name: is the name for the segment. A name is required, but it does not have to be unique.
Horizontal Dist: is the horizontal length of the offset
213