Spectra Precision Survey Pro v4.9 - Manual (Page 231)

Miscellaneous Screens Menu
The following screens are only available via a Quick Pick or a power button (see the User's Manual). They are not
available directly from any menu item.
Past Results
Create Points
Edit Description List
Trimble Slant HR -> HR
Convert Slant HI -> HI
Quick Pick Editor
Select Points
Map View
Map Display Options
Manage Basemaps
Edit Basemaps
Smart Targets
Manage Smart Targets
Edit Smart Targets
Main Index
Past Results
, Past Results (where applicable)
When the Past Results option is used to enter a value in a specific field that was computed previously within the
software.
Select the line that contains the value that you want to use and tap .
The selected value will then be entered in the field associated with that power button.
Create Points Screen
[Job] [Edit Alignments] Create Point
The Create Points screen is used to store points that coincide with specific locations on an alignment.
Alignment Nodes: When checked, will store points at locations where a change occurs on an alignment, for example
where a straight section and a curved section meet.
Sta. Intervals: When checked, will store a point at the specified station interval along an alignment.
Start Point Name: is the name for the first point that will be stored from this screen.
Description: is the description that will be given to all the points that are stored from this screen.
Start Location: is the location for the first point, which is the reference location used to compute the locations of the
231