Instrument settings, Screen, Dtm index – Spectra Precision Survey Pro v4.9 User Manual
Page 21: Instrument settings - screen 1

DTM Index
View DTM
Layers for Staking DTM
Choose Polyline
Add/Edit Break-lines
Edit Break-lines Polylines
Points on DTM Layer
3D View
3D View Settings
Instrument Settings
[Job] [Settings]
The Settings screen consists of several separate screens where each individual screen accesses different types of
settings.
Tap on the index card style tabs at the bottom of the screen to access different Settings screens. If the desired tab is not
in view, tap the small arrow buttons to scroll through the available tabs.
The Instrument Settings screen is the first of multiple screens used to identify and configure the instrument(s) you are
using with the software. The correct settings must be configured for successful communications between the data
collector and the instrument.
The upper portion of the first Instrument Settings screen lists the names of all the instrument profiles on the data
collector. The other columns list the COM Port, Brand, and Model of the instrument defined in each profile.
Manual Mode: A special profile that cannot be deleted. When activated, all surveying is performed without being
connected to an instrument and all shot data must be entered manually.
Note: When running in leveling mode, the [Instrument Settings…] can be selected for Manual Mode to open the
screen.
[Instrument Settings]: Opens the next
screen where the settings in the selected instrument profile
can be modified.
Note: When editing an existing instrument profile, you cannot modify the instrument brand or model.
[Create New Instrument]: Opens the next
screen where you can configure the settings for a new
instrument and create a new instrument profile.
21