Level – Spectra Precision Survey Pro v4.9 User Manual
Page 136
Station/Point Name: displays the Station column where the name of each point and the number of each turning point
shot is listed. This column cannot be turned off.
BS(+): is the column that lists all the backsight readings. This column cannot be turned off.
BS Dist: When checked, a column is displayed that lists the horizontal distances measured from the instrument to each
backsight.
HI: is the column that lists the elevations computed for the instrument at each setup. This column cannot be turned off.
IS(-): When checked, a column is displayed that lists the readings for all intermediate shots. (Intermediate shots
include side shots and stakeout shots, which are not included as legs of the level loop.)
IS Dist: When checked, a column is displayed that lists the horizontal distances measured from the instrument to each
intermediate shot. (Intermediate shots include side shots and stakeout shots, which are not included as legs of the level
loop.)
FS(-): is the column that lists all the foresight readings. This column cannot be turned off.
FS Dist: When checked, a column is displayed that lists the horizontal distances measured from the instrument to each
foresight.
Elev: is the column that lists the elevation computed for every point shot. This column cannot be turned off.
Desc: When checked, a column is displayed that lists the description for each point shot that exists in the current job.
(Turning points are not stored in the job and therefore do not have descriptions.)
Column Width: When Auto Resize is checked, the column widths are automatically sized so the content of each
column is visible.
Style: When set to Compact, the backsight data for a particular setup is displayed on the same row as the foresight data
from the previous setup. When set to Double Spaced, the data for each backsight and foresight shot are displayed in
separate rows.
Level
[Leveling] [Level]
The Level screen provides information about the current level loop and is used to specify which of the four possible
observation types to shoot next.
Current Loop Details: displays details about the current loop.
Backsight Point: displays details about the current backsight. Most of these details will only be available after
shooting an intermediate shot (side shot or stakeout shot).
[Sideshot>]: opens the
screen where the required information is entered to perform a side shot.
[Stakeout >]: opens the
screen where the required information is entered to perform a stakeout shot.
[Turn to Benchmark >]: opens the
screen where the required information is entered to shoot either a
closing or non-closing benchmark.
[Turn to Turning Point…]: Opens the
screen, described next, where you can immediately begin taking the
136