Spectra Precision Survey Pro v4.9 - Manual (Page 102)

The columns available depend on the receiver being used. Consult your receiver’s documentation for more
information.
Position
The Position card displays your current position as well as your course and speed information if you are moving. The
Position card will display one of three coordinates: WGS84 latitude, longitude, height; Local latitude, longitude,
height; or Grid north, east, elevation.
Solution: See the Receiver card.
Latitude/Longitude/Height: or North/ East/ Elevation: displays the location of the receiver.
Heading: Displays your course over ground if you are moving. If your coordinate display is geodetic, this heading is
with respect to geodetic north. If your coordinate display is grid, then this heading is with respect to grid north.
Speed: Displays your horizontal speed over ground if you are moving.
WGS84: Set the position display to show WGS84 latitude, longitude, and height. This option is always available.
Local LLh: Set the position display to show Local latitude, longitude, and height. This option is only available when
you have a coordinate system selected and solved.
Note: Local LLh numbers make sense when in mapping plane mode. When using Ground – Default Ground
Calibration mode, you should not use Local LLh display.
Grid: Set the position display to show Grid north, east, and elevation. This option is only available when you have a
coordinate system selected and solved.
Starting a Survey
Start Survey at Base
[Survey] [Start Base]
When you are starting a survey at your own RTK base, select the Start Base menu item. You will first be prompted to
select a receiver with the
Connect to Base screen.
Connect to Base
The Connect to Base screen is used to select a base receiver to connect to, and to pick the format for base corrections.
The display of the receivers to select list is identical to the
Receiver Settings screen. Below the list of receivers, the
modem type of the selected receiver is displayed.
Correction Format: Is where you select the correction format of the base receiver broadcast. The formats available
will depend on your brand and model.
Use CMR Station Index: Set a CMR station index, if you are using a CMR type correction format.
[Connect>]: Connects to the selected receiver and advanced to the
Set Base Receiver screen .
102