The road card, Roads report screen – Spectra Precision Survey Pro v4.9 User Manual
Page 215

The New Road screen is identical to the
screen and is used to assemble the parts of a road or edit an
existing road. This screen consists of five separate index card style tabs. Each tab accesses a different card that is used
to define a particular part of the road.
The Road Card
[Roads] [Edit Roads] ([New…] or [Edit…]) [Road]
The Road card of the New Road screen is used to select the alignment to use for the road.
Road Name: is the name assigned to the road. The name must not be the same as any existing road name.
Alignment Description: displays the name of the selected alignment.
[Choose Alignment]: opens the
screen where an existing alignment can be selected.
[Check]: checks the road for errors and displays the results in the
[View Profiles]: opens the
screen where you can see information about the cross-sectional profile of the
road at any station.
[Set POB…]: opens the
screen where information about the current alignment can be
changed.
Roads Report Screen
[Roads] [Edit Roads] ([New…] or [Edit…]) [Road] [Check…]
The Roads Report screen displays a list of any errors after performing the following tests:
Confirm that the alignment contains both a HAL and a VAL.
Confirm that the horizontal length of the VAL is greater than or equal to the HAL.
Confirm there is at least one template for each side of the road.
Confirm the first template coincides with the starting station.
Confirm that all template segments have a name. (The names do not have to be unique.)
Confirm that the same number of segments exist on each side of the alignment.
Confirm that each widening start station is less than the corresponding widening’s end station.
Confirm that one widening does not overlap with another widening.
Confirm that the start station for each super elevation is less than the end station.
Confirm that no two super elevations overlap.
Confirm that the start and end of each super elevation either both hinge on the centerline or both hinge on the
edge.
Confirms all templates, widening and super elevations are on the alignment.
Confirms no more than one template exists at any particular station on the same side of the road.
Confirms the first segment of all templates is greater than 0.
Checks for empty templates.
Checks for widenings with zero width.
Checks for overlapping parabolic transitions.
Checks for template-widening width matching.
Checks for template-super elevation slope matching.
215