Spectra Precision Survey Pro v4.9 User Manual
Page 26
Serial Port: Displays the serial port the receiver uses to communicate with the modem.
[Configure]: Opens the
screen where you can change the settings for communication between
the receiver and the data modem.
Modems where you can set the channel and configure radio settings
Serial Port fields
Baudrate: Displays the baud rate the receiver uses to communicate with the modem.
Parity: Displays the parity the receiver uses to communicate with the modem.
Serial Port: Displays the serial port the receiver uses to communicate with the modem.
screen where you can change the settings for communication between
the receiver and the data modem.
Radio Settings fields
Channel: Displays the last radio channel when applicable.
Sensitivity: Displays the last radio sensitivity when applicable.
[Configure]: Establishes communication with the radio firmware and opens the
screen where you can
change the radio channel and sensitivity settings.
Modems where you cannot configure COM settings, but can configure channel settings
Channel: Displays the last radio channel when applicable.
Sensitivity: Displays the last radio sensitivity when applicable.
[Configure]: Establishes communication with the radio firmware and opens the
screen where you can
change the radio channel and sensitivity settings.
Cellphone modem settings
Serial Port fields
Baudrate: Displays the baud rate the receiver uses to communicate with the cellphone.
Parity: Displays the parity the receiver uses to communicate with the cellphone.
Serial Port: Displays the serial port the receiver uses to communicate with the cellphone.
screen where you can change the settings for communication between
the receiver and the cellphone.
Select modem fields
Select Modem: Select the specific cellphone modem that applies.
[Edit Modem]: Edit the existing modem parameters.
[Manage Modem]: Manage saved GSM modems.
Base Phone #: Enter the telephone number of the RTK base receiver’s cell phone.
26