Spectra Precision Survey Pro v4.9 - Manual (Page 166)

[Stake >]: opens the next screen, which is identical to the third Stake Points screen.
Stake Spiral and Offset - Screen Summary
Screen 1 is used to define the primary spiral curve used to determine the location of the curve to be staked and the
station associated with the Start Point.
Screen 2 is used to define the offset distance and location, the station to be staked and the station interval.
Screen 3 provides the distance and direction information to the current station to be staked from the occupy point.
Screen 4 is used to stake the current station.
Show Station and Offset
[Stakeout] [Show Station]
The Show Station and Offset routine allows you to take a shot to a prism that is positioned anywhere near a polyline, a
range of points that define a line, or an alignment to see where the prism is located in relation to the line.
[Tap Line…]: allows you to tap an existing polyline or alignment that the station and offset will be computed from.
[To/From…]: allows you to enter a range of points that define the line where the station and offset will be computed
from.
Begin Station: is the station assigned to the beginning of the line.
[Backsight…]: opens the Station Setup screen.
[Next >]: takes you to the next Show Station and Offset screen where the slope staking parameters are set up.
Show Station and Offset- Screen 2
The second Show Station and Offset screen is used to take a shot to the prism and view the data.
Height of Rod: is the length of the rod.
EDM: This button can be toggled to various EDM modes. The options available depend on the total station being
used. Consult the total station's documentation for more information on the EDM modes that it supports.
Station: displays the station at the rod position.
Offset Dist: displays the perpendicular offset from the centerline to the rod position.
Elev: displays the elevation at the rod position.
Offset: displays if the rod position is to the right of the line, left of the line, or on the line.
Segment: displays the name of the template's segment at the rod position.
166