Spectra Precision Survey Pro v4.9 - Manual (Page 72)

side shots in reverse order.
Option: When shooting the first set, measuring a distance and angle for each shot is required, but when starting all
subsequent sets, Angle Only can also be selected for this field.
Number of Sets: Where the desired number of sets is specified.
[Done with SS >]: Used when you are finished shooting side shots. This is only available while taking Face 1 side
shots for the first set.
[Shoot] / [Shoot BS]: Used to shoot the current point. If the shot was already performed, the [Next >] button will be
enabled. Tapping [Shoot] again will throw out the results of the last shot and re-shoot it.
[Next >]: Used to take the next required shot in the routine. The button label will contain additional information to
help indicate which shot is required next.
Distance Offset
[Survey] [Distance Offset]
The Distance Offset screen is used to store a new point that is a known distance away from the rod location. This
screen is useful when the rod cannot occupy the new point’s location.
Foresight: The point name that will be stored.
Desc.: The description for the offset shot that is stored.
HR: The length of the rod.
: Opens the Smart Target options.
Offset: The offset distance that is to the left (when L is selected) or right (when R is selected) of the prism from
the total station’s point of view.
Horz Dist Offset: The offset distance that is beyond the prism (positive value) or in front of the prism (negative value)
from the total station’s point of view.
Elevation Offset: The offset distance that is below the prism (negative value) or above the prism (positive value).
Note: Multiple offsets can be applied simultaneously.
[Shoot]: Take a shot to the prism, apply the offset(s) entered, and then store the new point.
[Backsight…]: Opens the Station Setup screen. where the current backsight can be modified.
: A shortcut to the Surveying Settings screen.
Horizontal Angle Offset
[Survey] [Horizontal Angle Offset]
72