Record mode remote elevation, Remote, Elevation – Spectra Precision Survey Pro v4.9 User Manual
Page 78: Screen, Record mode, Remote elevation

[BS Setup…]: Opens the
screen where the current backsight can be modified.
screens.
Record Mode
[Survey] [Record Mode]
When running in Record Mode, all control of the total station is performed from the total station's keypad. The data
collector will simply log each shot that is taken from the total station.
This routine is typically used for topo work, where the total station remains over a single occupy point during all shots.
Note: Not all total stations support record mode.
Foresight: The point name that will be used when storing the next point. Once a point is stored, it will be incremented
to the next available point.
Description: The description for all the shots that are stored.
HR: The length of the rod.
: Opens the
Start Recording]: Starts recording all shots performed from the total station.
[Stop]: Stops record mode.
[Backsight…]: Opens the
screen. where the current backsight can be modified.
Remote Elevation
[Survey] [Remote Elevation]
The Remote Elevation screen will compute the elevation for the occupy point by shooting a foresight with a known
elevation, or it will compute the elevation for a foresight when the occupy elevation is known.
Known Elevation Is…: Where you specify if the Occupy point or the Foresight point has a known elevation.
Elevation: The known elevation for the selected point.
Shoot: Defines if you want to perform a Direct shot only, or Direct & Reverse shots to the foresight.
HI: The distance that the total station is above the ground.
HR: The length of the rod.
: Opens the
78