beautypg.com

Cross-section view station staking - screen 2, Station staking – screen 2 – Spectra Precision Survey Pro v4.9 User Manual

Page 171

background image

The Station Staking routine allows you to stake the stations, offsets, and surfaces built into a LandXML file.

The first Station Staking screen is used to load a LandXML file and view the details of that file.

The box on the left displays the horizontal view of the centerline include within the LandXML file and the box on the
right shows the vertical view.

[Set Center Line…]: allows you to select any polyline or alignment in the current job to use as a centerline. This will
replace any centerline loaded from the LandXML file.

[View Cross-Sections…]: opens the Cross-Section View screen, described below, where you can view the station,
surface, and offset details of the loaded LandXML file.

[Load From LandXML…]: opens the Open screen where you can select which LandXML file to load.

[Backsight…]: opens the

Station Setup

screen where you can set your backsight.

[Next >]: opens the next

Station Staking

screen.

Cross-Section View

[Stakeout] [Station Staking] [View Cross-Sections]

The Cross-Section View screen is used to view the station, surface, and offset details of the loaded LandXML file.

The upper portion of the screen lists the Station, Northing, Easting, and Elevation at the selected node.

The larger graphic area displays the cross-sectional view of the selected surface. The smaller graphic area displays the
horizontal view of the centerline.

Zoom Extents: will zoom so the entire cross section will fit inside the frame.

Zoom In Button: will zoom the current screen in by approximately 25%.

Zoom Out Button: will zoom the current screen out by approximately 25%.

: expands a list where you can select to zoom to a window, zoom up vertically, or zoom down vertically.

Stations: allows you to scroll through and view all the stations in the LandXML file.

Surfaces: allows you to scroll through and view all the surfaces in the LandXML file.

Offset: allows you to scroll through and view the details of the node at the selected offset.

Tap

(Close) to exit from this screen.

Station Staking – Screen 2

[Stakeout] [Station Staking] [Next >]

171