Watlow LogicPro - Manual (Page 98)

Chapter 8: Ladder Diagrams LogicPro User’s Guide
82 Watlow Anafaze Doc.# 28002-00 Rev 3.00
Ladder Toolbar
When you select Ladder diagram as the language for a
program window, LogicPro:
• Displays the Ladder toolbar on the right side of the
screen.
• Changes the menu items in the Tools menu.
To use any one of these tools, click it on the toolbar or select
it from the
Tools menu.
Table 8.1 contains a list of the available tools.
Table 8.1 Ladder Diagrams Toolbar
This Tool Performs This Function
Selector
Normally Open Contact
Normally Closed Contact
Off to On Transitional Contact
(Positive)
On to Off Transitional Contact
(Negative)
Normal Coil
Latched Coil (Set)
Unlatched Coil (Reset)
Function Block
Comments
Cross Reference