Watlow LogicPro - Manual (Page 193)

LogicPro User’s Guide Chapter 11: User Defined Function Blocks
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 177
Working with UDFB Files
The following sections describe how to work with UDFB
files.
Editing UDFB Files
When UDFB header or C files are active on the window, the
Undo, Cut, Copy and Paste commands in the Edit menu are
enabled. You can use these functions to edit text.
Opening UDFB Files
To Open UDFB files:
1. Select File .
2. Select Open.
3. Select User Defined Function Block to open the
header and C files of the selected UDFB. The Open
User Defined Function Block dialog box, shown in
Figure 11.6, appears.
4. Select the UDFB you want to open.
5. Click [OK] .
Figure 11.6 Open User Defined Function Block
Dialog Box
Closing UDFB Files
To Close UDFB files:
1. Select File .
2. Select Close .