Watlow LogicPro - Manual (Page 28)

Chapter 2: LogicPro Workplace LogicPro User’s Guide
12 Watlow Anafaze Doc.# 28002-00 Rev 3.00
Table 2.4 The Tools Menu
UDFB (User Defined Function Block) Menu
This menu gives you control over the various tools available
when you’re creating or editing a UDFB. There are compile
and build options available for both execution and simulation
purposes because each creates its own variant of the UDFB
and saves it in the corresponding library. See Table 2.5 on
page 13 for a detailed list and explanation of the items on the
UDFB menu.
Menu Option Description
Language
Select the programming language for
the active window from the submenu:
SFC - Grafcet Sequential Function
Chart language. This is the LogicPro
default language for any program win-
dow. You may change the defaults
using the Options menu.
LD - Ladder This option selects the
Ladder Diagram language for the
active window.
FBD - This option selects the Function
Block Diagram language for the active
window.
Tools
The selected language determines the
options for the rest of this menu. The
options displayed correspond directly
with the tools available from the differ-
ent Language Toolbars. For more infor-
mation, please refer to the appropriate
section concerning the language you
wish information on.
NOTE: Once you select a language
and start to build a program, LogicPro
prevents you from changing the lan-
guage as long as any element exists in
the window.