Watlow LogicPro - Manual (Page 112)

Chapter 8: Ladder Diagrams LogicPro User’s Guide
96 Watlow Anafaze Doc.# 28002-00 Rev 3.00
Figure 8.17 Creating a New Parallel Branch
from the Left Power Rail
Figure 8.18 After Creating a New Parallel
Branch from the Left Power Rail
If you need to add more parallel branches:
1. From the tool bar, select the element type to add.
2. Start dragging on the right side of the left power rail and
below the rung you to which you want to attach the new
branch.
3. End dragging close to the rung.
NOTE! Ensure that the Handles appear on the rail directly
below the rung number to ensure that the new
parallel OR branch starts from the existing rail.
Inserting Multiple Output Coil branches
To create multiple output coil branches:
1. Select a coil type element (either normal coil, latched coil
or unlatched coil) from the toolbar.
2. Click and drag from the left of the coil below and past the
existing coil. See Figure 8.19 on page 97.
3. Release the mouse button. A new branch with the new
coil is added below the original. See Figure 8.20 on page
97.