Watlow LogicPro - Manual (Page 273)

LogicPro User’s Guide Chapter 16: Cross-Referencing
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 257
FBD Setup
In the FBD Setup dialog box, as shown in Figure 16.7, you
can select what information is included for each SFC. For
example, you can specify:
• If the FBD graphic is output, by selecting Graphic .
• If a cross-reference of the Variables in the FBD is output,
by selecting
Cross Reference .
Figure 16.7 FBD Setup Dialog Box