Watlow LogicPro - Manual (Page 129)

LogicPro User’s Guide Chapter 9: Function Block Diagrams
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 113
Figure 9.6 Function Blocks in FBD with
Handles
NOTE! When cutting or copying, all inputs and outputs
must be attached to something, be it a Variable or
the input or output of another function block.
When pasting a copy of a function block into the program
from which it was copied, LogicPro automatically assigns it a
new, unique name as shown in Figure 9.7.
Figure 9.7 Pasted Function Block in FBD
When deleting a function block, all the Variables dependent
upon that function block are deleted, as well as shown in
Figure 9.8 and Figure 9.9 on page 114.