Watlow LogicPro - Manual (Page 267)

LogicPro User’s Guide Chapter 16: Cross-Referencing
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 251
Function Block Diagram On-line Cross-Reference
To perform a FBD On-line cross-reference, while in an FBD
window:
1. Select the Tools menu.
2. Select Cross Reference
- or -
Click the
[Cross Reference] button on the toolbar.
The standard pointer changes into a modified pointer, as
shown in Figure 16.1 on page 250.
3. Click on a Variable for which you want to view a cross-
reference. The
Cross Reference dialog box appears.
This dialog lists all the instances of that Variable and the
location of each instance.
4. If you click outside all elements, the Cross Reference
dialog box appears and lists all the Variables present for
the entire FBD window and their location in the Program.
5. You can minimize and move the Cross Reference
dialog box so that you can view and edit portions of the
Program. If you change the Program or Variables, the
Cross Reference dialog box data is not updated until
you close and then reopen the dialog box.
6. Click [Print] to print the on-line cross-reference listing.
7. Click [OK] to close the dialog box.
Cross-Reference Output
The cross-reference output is sorted by type in the following
order:
1. Project Variables
2. Resource Variables
3. Program Variables
Within each of these categories, the Variables are sorted in
alphabetical order. If Comments for the Variable exist, they
are displayed on the line below the Variable Code. The last
information displayed is the locations of the Variables.