Watlow LogicPro - Manual (Page 260)

Chapter 15: Downloading & Monitoring LogicPro User’s Guide
244 Watlow Anafaze Doc.# 28002-00 Rev 3.00
4. Select the check box in the Select column next to the
variables you want to monitor in the Watch Grid.
5. Select Watch Grid from the View menu.
6. In the Watch Grid, right click on a variable.
7. Select Force ON to force a variable on, Force OFF to
force a variable off, or Clear Force to clear the forcing
of the variable.
Enabling, Disabling and Clearing Forcing
ç
CAUTION! Variables remain in their forced states until you
clear or disable the forced condition(s), or termi-
nate the logic program. Closing Variable Watch
will not clear or disable forced variables. Force
variables only when you are sure it is safe to do
so.
To enable, disable, or clear all forcing:
1. Select Forcing Options from the Options menu.
2. Select Enable , Disable , or Clear .
Saving View Settings
To save view settings:
1. Click File , and then click Save . The Save dialog box
appears.
2. Enter the name of the .PVW file.
3. Click [Save] .
Watch Grid View
The Watch Grid contains information about the variables you
have chosen in the Select Grid. See Figure 15.6 on page 245.