Digital_out_206x – Watlow LogicPro User Manual

Page 214

Text mode
Original mode

Chapter 12: Function Blocks

LogicPro User’s Guide

198

Watlow Anafaze

Doc.# 28002-00 Rev 3.00

Digital_Out_206x

The Digital_Out_206x driver supports the relay outputs on the PPC-
206x Digital Out series modules.

To associate a variable with a relay output:

Open the

Add Program/Resource Variable

dialog box.

Enter a unique variable

Name

Select

BOOL

from the

Type

list.

Select

Output

by clicking the check box.

Select

Digital_Out_206x

from the

IO Driver

list.

Select

BIT

from the

IO Size

list.

Enter the

IO Physical Address

. The address is:

X.Z

X is the module address (41-46)
Z is the module I/O number (1-16)

Click

[OK]

PPC-206x Digital Out Addressing Example

To create a variable named Relay_6 that sets the state of the 6

output on a PPC-206x module with its rotary address switch set to
41, set the options in the Add Program/Resource Variable
dialog box as illustrated below.