Watlow LogicPro - Manual (Page 29)

LogicPro User’s Guide Chapter 2: LogicPro Workplace
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 13
Table 2.5 The UDFB Menu
Execution Menu
This menu contains many useful tools that you will need to
compile, link, download, stop, and start a project. See
Table 2.6 for a detailed list and explanation of the items on the
Execution menu.
Table 2.6 The Execution Menu
Simulation Menu
This menu gives you control over all aspects of running a
simulation. Refer to Table 2.7 on page 14.
Menu Option Description
Compile for
Execution
Compiles and error checks a
UDFB in the active window for
downloading, using the compiler
selected for the particular
resource.
Build Execution
Lib…
Performs the same function as
Compile for Execution (above),
but also adds the
.OBJ file to the
UDFB library for this resource
type. You must add a UDFB to the
library before you can use it in a
program.
Compile for
Simulation
Compiles and error checks the
UDFB in the active window for
simulation using the Borland

C++ compiler.
Build Simulation
Lib…
Performs the same function as
Compile for Simulation (above),
but also adds the
.OBJ file to the
UDFB library for this resource
type. You must add a UDFB to the
library before you can use it in a
program.
Menu Option Description
Build All and
Run Compiles, downloads and starts the
program.
Download and
Run Downloads and starts a previously
compiled program.
Start Executable
Starts a previously downloaded pro-
gram.
Terminate Stops the currently running program.