Watlow LogicPro - Manual (Page 111)

LogicPro User’s Guide Chapter 8: Ladder Diagrams
Doc.# 28002-00 Rev 3.00 Watlow Anafaze 95
Figure 8.15 Adding Another Branch
Figure 8.16 Branch Added
To create a new parallel branch from the left power rail, as
shown in Figure 8.17 on page 96:
1. From the toolbar, select the element type you want to
add.
2. Start dragging on the right side of the left power rail and
below the rung you to which you want to attach the new
branch.
3. End dragging close to the rung.
The finished diagram is shown in Figure 8.18 on page 96.
NOTE! Ensure that the handle does not appear on the rail
below, if there is one. This is to ensure that you
want to insert a new rung.
Click Release
Drag