Watlow LogicPro - Manual (Page 50)

Chapter 4: Resources LogicPro User’s Guide
34 Watlow Anafaze Doc.# 28002-00 Rev 3.00
5. Enter a Name for the Resource you want to define.
LogicPro saves this Resource as a database in the Project
subdirectory.
6. Click [OK] to define the Resource. The Attributes
dialog box appears.
– or –
Click
[Cancel] to exit the dialog box.
Figure 4.2 PPC-2000 Attributes Dialog Box
PPC-2000 Attributes
The following LogicPro default communications settings will
match the PPC-2000’s port 1 when the rotary CONFIG switch
is set to position A.
• Baud: 19200
• Parity: Even
• Device Address: 1