Watlow LogicPro - Manual (Page 104)

Chapter 8: Ladder Diagrams LogicPro User’s Guide
88 Watlow Anafaze Doc.# 28002-00 Rev 3.00
Creating and Editing Ladder Diagrams
LogicPro allows you to use the many editing features
available in Windows.
Inserting Rungs
To insert a rung into a Ladder program between two existing
rungs:
1. From the toolbar select the new element type you want to
add.
2. Click: Anywhere in the program window to create the
first rung
- or -
Between two existing rungs
- or -
Above the first rung
- or -
Below the last rung.
The program is redrawn with the element on a new rung. The
rung number in front of the left power rail is updated.
NOTE! In rungs with multiple branches, such as the one
in Figure 8.3, a new rung cannot be inserted be-
tween these branches.
Figure 8.3 Rungs with Multiple Branches
Inserting Elements
To insert an element on an existing rung:
1. Select the element type you want to add from the toolbar.
2. Click on the rung.
The new element is inserted and the adjacent elements adjust
themselves to accommodate the new element.