Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 98)

Section 4: Commissioning
10/08 98 51207 Revision 1
The output signal (Limit 1
out) of limit 1 switches OFF
above a weight of 900 kg.
The output signal (Limit 2
out) of limit 2 switches OFF
below a weight of 290 kg.
Both limit values have a
hysteresis of 10 kg.
In the event of a power
failure, the two outputs go to
OFF, thus indicating underfill
and overfill at the same time.
If the limits (Limit 1 and Limit
2) for 'On' and 'Off' are equal
(on = off), output 1 (Limit 1
out) switches ON, when the
weight (Wgt) exceeds the
value and output 2 (Limit 2
out) switches OFF, when the
weight drops below the value.
Setup/Limit parameter
Limit 1 on 900 kg
Action set marker 1 X64=1
Condition no condition -----