Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 108)

Section 4: Commissioning
10/08 108 51207 Revision 1
4.11.4 Transfer Dataset from Instrument to PC
With [ConfigureIt]-[Load from Device] the complete
dataset (including the calibration data and parameters) is
transferred from the instrument to the PC.
4.11.5 Store Current Dataset on PC
With [File]-[Save as] the complete dataset (including the
calibration data and parameters) can be stored in a file.
The folder can be selected and a new name for the file
can be given.
The file [Charge old.cfg] is added at [Mixhouse].
The configuration can be found on the PC with the Explorer in the following folder: