Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 62)

Section 4: Commissioning
10/08 62 51207 Revision 1
4.3.3 Parameter Table
- SEtuP
- Cd Calibration data
- 000 CALIb nEW new calibration, VIEW view data, Mod modify calibration
- 001 MAX.FSd Decimal point position, Max (Scale range) and weight unit
- 002 StEP Scale interval
- 003 dEAdLo Deadload setting by weight (LoAd) or mV/V (MVoLt)
- 004 SPAn Calibration weighing range by weight (LoAd) or mV/V (MVoLt)
- 005 0-rnG Show used zeroset range
- 006 uVolt.d Show µV/d
- 007 WEIGHt Show current gross weight, with 10-fold multiplier is activated
- CP Calibration parameter
- 010 MEAtIM Measure time
- 011 FILtEr Digital filter
- 012 FCut Cut-off frequency
- 013 tStMod Test mode
- 014 WAM W&M, legal for trade
- 015 StStIM Standstill time
- 016 StSrnG Sandstill range
- 017 TArtIM Time out for taring / zeroset
- 018 ZESrnG Zeroset range
- 019 ZEtrnG Zerotrack range
- 020 ZEtStP Zerotrack step
- 021 ZEttIM Zerotrack time
- 022 oVrLd Overload
- 023 MIn Min weight
- 024 MuLrnG Multi range mode
- 025 rAnG 1 Range 1
- 026 rAnG 2 Range 2
- LI Limits
- 030 LIM.1on, LIM.1oF Limit 1 'On', Limit 1 'Off'
- 031 LIM.2on, LIM.2oF Limit 2 'On', Limit 2 'Off'
- 032 LIM.3on, LIM.3oF Limit 3 'On', Limit 3 'Off'
- LA Limits, action / condition
- 033 LIM.1on Action / Condition
- 034 LIM.1oF Action / Condition
- 035 LIM.2on Action / Condition
- 036 LIM.2oF Action / Condition
- 037 LIM.3on Action / Condition
- 038 LIM.3oF Action / Condition
- do Digital outputs
- 040 bCd.out BCD-Mode: GroSS = gross, NEtIt = net if tared, else gross, SELECt,
trnSP
- 041 outP. 1 Output 1
- 042 outP. 2 Output 2
- 043 outP. 3 Output 3
- dI Digital inputs
- 044 InP.1on Input 1, condition
- 045 InP.1oF Input 1, condition
- 046 InP.2on Input 2, condition
- 047 InP.2oF Input 2, condition
- 048 InP.3on Input 3, condition
- 049 InP.3oF Input 3, condition
- Ao Analog outputs
- 050 AnA.Mod Mode: GroSS = Brutto, NEtIt = Netto wenn tariert, sonst Brutto, SELECt,
trnSP
- 051 AnA.rnG Range 0/4 - 20 mA
- 052 out.Err Output at error
- 053 out.< 0 Output at < 0
- 054 out.>20 Output at > Max
- 055 WGt.0/4 Weight at 0/4 mA