Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 121)

Section 5: SMA Protocol
10/08 121 51207 Revision 1
Request for Taring with Fixtare Value
Command: T
Reply:
The scale makes a taring attempt using the fixtare value and signals the
tared status in the and characters.
For details, see Chapter 5.4.1 .
Request for Zero Setting of the Scale
Command: Z
Reply:
The scale makes a zero setting attempt and signals the zero status in the
character.
For this function, the stability condition must be met. The maximum waiting time for
stability is set under [Tare timeout]; see Chapter 4.5.13 .
For details, see Chapter 5.4.1 .
Unless the scale is in the zero setting range, an error reply is generated.
Request for Tare Resetting
Command: C
Reply:
The scale deletes the tare weight and signals the tare reset status in the status
character. The scale tare is reset.
For details, see Chapter 5.4.1 .
5.3.3 Scale Diagnosis
Command: D
Reply:
The scale starts the diagnosis and returns a diagnosis reply.
For details, see Chapter 5.4.1 .