Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 110)

Section 4: Commissioning
10/08 110 51207 Revision 1
4.11.6 Store Current Dataset or Selected Parameters in the Instrument
With [ConfigureIT]-[Save to device] parts or the total
configuration can be transferred to the instrument.
Select with [>] the parameters to
be transferred or with [>>] for all
parameters.
The transfer is started with [OK].
4.11.7 Reset the Instrument to Factory Default
With [ConfigureIt]-[Reset to default] the default data (data in
the instrument when leaving the factory) are taken. For
transfer to the instrument continue with chapter 4.11.6 .
4.11.8 Exporting a Dataset as Printable File
With [File]-[Print] the dataset can be sent to a printer or stored in a file.