Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 18)

Section 2: Process Indicator
10/08 18 51207 Revision 1
2.3.7 Plug-in Cards
On the main board, the PR 5410 Process Indicator can be fitted with up to 2 plug-in cards. Mounting
different types of cards on Slots 1 and 2 is mandatory (exception: PR 5510/04)!
If a card is fitted on Slot 4, only one more card may be mounted on Slots 1 or 2.
Product Function Position
PR 5510/02
2 serial RS-232 interfaces Protocols and parameters are adjustable
via software.
Slot 1 or 2
PR 5510/04
1 serial RS-232 interface and
1 serial RS-485/RS-422 interface. The serial RS-485/-422 interface is
configurable using DIL switches on the
card. Protocols can be selected via
software.
Slot 1 and/or
2
PR 5510/07
1 analog output,
4 analog inputs 16-bit analog output, 0/4 - 20 mA.
Input: 4 channels with common ground,
3000 d resolution (max. 1 card)
Slot 1 or 2
PR 5510/08
BCD output Output: 5 decades + plus or minus sign or
3 bytes binary, open emitter. 1 input
Slot 1 or 2
PR 5510/09
BCD output Output: 5 decades + plus or minus sign,
or 3 bytes binary, open collector. 1 input
Slot 1 or 2
PR 5510/12
6 optocoupler inputs and
12 optocoupler outputs
Digital interfaces electrically isolated via
optocouplers. Passive inputs and outputs.
Slot 1 or 2
PR 5510/14
Ethernet
10 / 100 Mbit/s Modbus TCP Slot 4
PR 1721/31
Profibus-DP slave Profibus-DP to IEC 61158 with
max. 12 Mbit/s
Slot 4
PR 1721/32
Interbus-S slave
Interbus-S slave with up to 2 Mbit/s Slot 4
PR 1721/34
DeviceNet slave
DeviceNet slave with max. 500 kbit/s Slot 4
PR 1721/37
EtherNet/IP
10 / 100 Mbit/s EtherNet/IP Slot 4
For product details, see chapter 3.3.3 .