Fairbanks X SERIES PR 5410 Process Indicator User Manual
Page 56
Section 3: Installing the Instrument and Plug-In Cards
10/08 56
51207 Revision 1
3.5.6 Connecting Platforms (CAP...)
One Combics analog platform (CAP... series) can be connected to the instrument.
The following example shows a platform with 6-wire connection and another one with 4-wire
connection.
Platforms with
4-wire connection require
links between +V and +S and
between –V and –S.
The cable colors shown above are valid for a CAPP4 500 x 400 and a CAPP1 320 x 420, as
an example.
The assignments of cable colors are given in the platform operating manual.
The cable shields must be connected to the GND terminal of the instrument. If the measuring lines
(+M, -M) are shielded individually, these shields must be connected to the GND terminal as well.