Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 15)

Section 2: Process Indicator
10/08 15 51207 Revision 1
2.3.3 Selection Using the Navigation Keys (VNC)
Press the down arrow key to scroll down, or the up arrow key to scroll up in a menu. Press
to select a menu item. To choose the desired setting for the selected menu, press or .
Press the key to exit a menu and continue the operation on the next higher level.
An arrow in front of a menu item indicates that there are menu sublevels. The menu item selected
by pressing is shown inversely.
Info
Show version Press the key to select an item.
Show status
If the list of menu items is long, a vertical bar graph on the left (black and gray) shows which part of
the list is displayed.
WP A/Calibration
Measuretime 320 ms
Digital filter off
Test mode absolute
W & M none
Standstill time 0.50 s
Standstill range 1.00 d
Availability of settings options (selectable with
or ) is indicated by preceding double arrows .
WP A/Calibration
Measuretime 640 ms Press to select the measuring time.
2.3.4 Tool Tip (VNC)
The 'tool tip' indicates valid value ranges or important properties in a pop-up window, see example:
This is a warning, that the zero tracking is not activated, if the Zerotrack time is set to 0.