Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 14)

Section 2: Process Indicator
10/08 14 51207 Revision 1
2.3 D ISPLAY AND C ONTROLS
2.3.1 Display
The display permits indication of 6-digit weight values (digit height 18 mm) with decimal point and
polarity sign.
Possible units of mass are t, kg, g or lb.
Status indication Weight value Mass unit
Front keys (Indicator / navigation)
Gross weight display
(G with NTEP or NSC mode) The weight value is within +/- ¼ d of
zero
Net weight display Stability of the weight value
, Tare weight or fixtare display Range indication
2.3.2 Front-Panel Keys
Indicator keys
Instrument settings, set-up Start printing
Taring, the current gross weight is
stored in the tare memory, provided
that:
- weight value is stable
- indicator not in error status
(function dependent on configuration)
Set gross weight to zero, provided
that:
- weight value is stable
- weight within zero setting range
(function dependent on
configuration)
Selection of display mode:
gross – net – tare weight
Analog test, weighing function
Calibration and parameter input using front keys is described in chapter 4.3 .