Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 124)

Section 5: SMA Protocol
10/08 124 51207 Revision 1
Z <1> <_> <_> <_ _ _ _ _0.000>
R <_> <1> <_> <_> <_ _ _ _ 7.025>
<_> <1> <_> <_ _ _ _ 7.650>
... repeat...
<_> <1> <_> <_> <_ _ _ _ 7.650>
The scale repeats the weight, until another command is received.
5.4.2 Reply with Unknown Command
?
A command from the controlling computer that is not implemented, or invalid, is
replied with an ASCII ‘?’.
5.4.3 Reply in Case of Communication Error
!
A command from the controlling computer that is unknown to the scale due to a
communication error is replied with an ASCII ‘!’. This includes parity error or frame
error (if any).
5.4.4 Reply with Diagnosis Command
When a diagnosis command is given, the scale makes a test and gives a status reply.
Reply format and meaning:
Start of diagnosis reply
‘R’ = RAM or ROM error; ‘_’ = OK,
‘E’ = EEPROM error; ‘_’ = OK
‘C’ = calibration error; ‘_’ = OK
Always: ‘_’ = OK
End of the diagnosis reply
Reply: without error status
Command
Reply
D <_> <_> <_> <_>