Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 127)

Section 6: PR1612 Commands
10/08 127 51207 Revision 1
6 PR 1612 Commands
This function enables the use of the following commands of the PR 1612 command set.
No license is required for using.
6.1 M AIN COMMANDS FOR INDICATOR FUNCTION
Command
Reaction Description
WGA QGAwwwwwwemz Read gross weight
WNA QNAwwwwwwemz Read net weight
WTA QTAwwwwwwemz Read tare weight
WDA QDAwwwwwwemz Read difference weight
wwwwwwe = Weight with sign and exponent
(e.g. '002340' = 002.34g; 001005 = 100kg)
m = no motion / Stand still,
z = 1: Tared, z = 2: Test, z = 4: Zero, 1/4d
WZA Q Set indicator to zero
WSA Q Set tare
WFA Q Reset tare
ZSC QZSC Reset communication
V QV5410-1.00 Version request
Comman
d Reaction Description
I Q I aaaaaa ddssnnnnn
LV QLVxxxx/xx-x.xxaaaaaa ddssnnnnnttttt
xxxx/xx-x.xx = instrument version
aaaaaa = Max in 5 digits with dec. point,
dd = Unit, ss = Scale interval,
nnnnn = Span in mV/V
ttttt = deadload in mV/V
Befehl Antwort Beschreibung
WSAwwwwwwe Q Set fixtare
ZS1Awwwwwwewwwwwwe QZS1A Set Limit 1
ZS2Awwwwwwewwwwwwe QZS2A Set Limit 2
ZS3Awwwwwwewwwwwwe QZS3A Set Limit 3
ZSDDDMMYYYYhhmm QZSD Set date and time
6.2 E RROR M ESSAGES FOR PR 1612 C OMMANDS
Error Description Error Description
E20000 Command unknown / failure E10010 Arithmetic overflow
E30000 BCC error E10020 Input > Max + Ovl
E50000 Analog test active E10030 Input > 36 mV or ADU failure
E60000 Wrong address / weighing point E10040 Weight exceeds display digits
E63000 Limit, fixtare > Max E10050 Weight not available
E70000 Scale tared / in motion E10060 No sense voltage
E10070 Negative measuring signal