Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 141)

Section 9: Configuration Print-Out
10/08 141 51207 Revision 1
9 Configuration print-out
The print-out can be started by using front keys and too
.
Configuration of PR5410
=======================================
Printed :2007-05-17 17:24:47
Firmware : Rel. 01.20.00.1024
2007-05-15 08:15
Appl-DEFAULT : Rel. 01.20
2007-05-08 15:52
Bios : Rel. 01.20.00.1024
2007-05-13 12:10
Boardnumber : 251390341
HW-Options
=======================================
Slot 1 -empty-
Slot 2 PR5510/12 digital I/O
Slot 3 Builtin digital I/O
Slot 4 -empty-
Operating parameter
=======================================
Address : A
PIN : 0
Use alibimemory : Gross
Sequencenumber : 0
Set Tare Key : tare & reset tare
SetZeroKey :only when not tared
N-B-T-Key : enabled
PrintKey : enabled
TestKey : enabled
Printing parameter
=======================================
Print mode :print selected item
1. Item : Sequencenumber
2. Item : Grossweight
3. Item : CR/LF
4. Item : disabled
5. Item : disabled
6 Item : disabled
Limit's
=======================================
Limit 1 on : 0 kg
Action : -no action-
Limit 1 off : 0 kg
Action : -no action-
Limit 2 on : 0 kg
Action : -no action-
Limit 2 off : 0 kg
Action : -no action-
Limit 3 on : 0 kg
Action : -no action-
Limit 3 off : 0 kg
Action : -no action-
Digital I/O
=======================================
Output 1 :limit 1 out X16=
Output 2 :limit 2 out X17=
Output 3 :limit 3 out X18=
Input 1 on :set zero X112=1
Condition :no condition -----
Input 1 off : -no action- Input 2 on :set tare X113=1
Condition :no condition -----
Input 2 off : -no action-
Input 3 on :reset tare X114=1
Condition :no condition -----
Input 3 off : -no action-
Serial assignment
=======================================
Printer : - none -
Remote display : - none -
JBUS/MOD-Bus : - none -
SMA : - none -
Asycom : - none -
Serial port Builtin RS232
=======================================
Protocol : XON/XOFF
Baudrate : 9600 bd
Bits : 8
Parity : none
Stopbits : 1
Output mode : CR/LF translation
Network settings
=======================================
HW-address : 00:90:6C:FB:E9:85
Hostname : PR5410-UDO-Mer
Use DHCP : YES
VNC-Client : 255.255.255.255
Calibration
=======================================
Max : 3000 kg
3000 d
Scale interval 1 kg
Deadload at : +0.000000 mV/V
Max at : +1.000000 mV/V
Not calibrated
Sensitivity : 833.33 cnt/d
: 4.000000 uV/d
Parameters
---------------------------------------
Measuretime : 160 ms
Digital filter : aperiod.
Fcut : 2.00 Hz
Test mode : Absolute
W & M : none
Standstill time : 0.50 s
Standstill range : 1.00 d
Tare timeout : 2.5 s
Zeroset range : 50.00 d
Zerotrack range : 0.25 d
Zerotrack step : 0.25 d
Zerotrack time : 1.0 s
Overload : 9 d
Min : 20 d
Range mode : Single range