Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 144)

Section 12: Specifications
10/08 144 51207 Revision 1
12 Specifications
12.1 I NSTRUCTIONS FOR U SE OF 'F REE S OFTWARE '
The firmware in the PR 5410 / X3 instrument contains free software that is licensed under:
GNU General Public License (GPL) Version 2, June 1991, and
GNU Lesser General Public License (LGPL) Version 2.1, February 1999.
This software, developed by third parties, is protected by copyright and is supplied free of charge.
The license terms and conditions of Free Software Foundation, Inc in English are enclosed in the
delivery of the instrument.
The source text written under the above conditions is contained on the CD-ROM delivered with the
instrument.
12.2 G ENERAL D ATA
The following characteristics are valid after a warm-up time of at least 60 minutes (reference
temperature: 23°C).
12.2.1 Backup Battery for Time/Date
The lithium battery for back-up of the time/calendar chip is activated before the instrument leaves
the factory.
Battery
lifetime:
Instrument connected continuously to the supply voltage typical 10 years
Instrument not connected (e.g., in storage)/temporarily
connected to supply voltage typical 7 years
12.2.2 Power Supply PR 5410/00
Supply voltage 100 V - 240 V AC +10% / -15% 50 / 60 Hz
Max. power consumption 11 W/ 13 VA
Primary fuse 500mAT 5x20 mm
12.2.3 Power Supply PR 5410/01
Supply voltage 24 V DC + / -20%
Max. power consumption 11 W
Primary fuse 1.6 AT 5x20 mm