Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 59)

Section 4: Commissioning
10/08 59 51207 Revision 1
4.2.4 Setting the Network Address Using Front-Panel Keys
Press Setup at the instrument
DS,PTS,Tw Press to reach the BIOS menu
BIOS w Press
BIO,S..w Is displayed, followed by
FLASH w Press to reach the menu
NET w Press
I,PADDRw Instrument will display the IP-address next
 00,000,0
The most significant part of the address* is displayed, with the position is selected
(the current digit blinks) and press
/ to select the digit
 00,000,0 By the least significant part of the address* can be set, continue with
MASK w Instrument will display the mask next
22525,0w
The most significant part of the mask* is displayed, with the position is selected (the
current digit blinks) and press
/ to select the digit
24,000,0w By the least significant part of the address* can be set, continue with
SAVE 0w It is asked, whether address and mask should be stored
SAVE 1w Alter with the '0' to '1' for storing and confirm with
DONEw Is displayed to indicate the execution
ERR31w * Error message, if digit group for IP-address / mask is not within 0 - 255
For DHCP (Assignment by server) the address has to be set to  00,000,0w  00,000,0w .
4.2.5 Viewing the Network Address via Front-Panel Keys
Press Setup at the instrument
DS,PTS,Tw Press to reach the BIOS menu
BIOS w Press
BIO,S..w Is displayed, followed by
FLASH w Press
ETHERw Press
DHC,P..w Instrument is waiting for address assignment by the server
17,202,4w The most significant part of the Ethernet address is displayed
2,108,1w Subsequently the least significant part of the Ethernet address is displayed
FLASH?w
Terminate with
Caution: In case of restart, a new address may be assigned by the server.
4.2.6 Searching the Instrument in the Network Using 'IndicatorBrowser'
The address can be determined using the 'IndicatorBrowser' program (stored in a directory on the
enclosed CD-ROM).
When connecting the instrument to a network, it is
“default“ in the DHCP mode; i.e., an address is
assigned to it by the server. This address, e.g.,
172.24.21.85, can be determined using the
'IndicatorBrowser' program.