Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 69)

Section 4: Commissioning
10/08 69 51207 Revision 1
4.4.3 INFO Function
When you press , the program releases and status messages are displayed. The key also has
other functions; see Chapters 0 and 0.
Info
Show version
Show status
Show HW-slots
Show alibi memory
When you select [Show version], the installed program releases and the board number are
displayed:
Info/Version
Firmware Rel. 01.00.00 Firmware release and creation date
2006-12-02 10:50
Appl-DEFAULT Rel. 01.00.00 Application release and creation date
2006-12-02 10:50
Bios Rel. 01.00.00 BIOS release and creation date
2006-12-02 10:50
Boardnumber 251398426 Main board identification number
(different from the device serial number)
When you select [Show status], instrument status information is displayed:
Info/Status
Free system RAM 5052 of 15196 kb
Clock battery ok (Low if voltage too low)
CAL-Switch closed (opened if CAL switch is open)
When you select [Show HW-slots], the installed plug-in cards are displayed:
Info/HW-Slots
Builtin RS 232 Standard serial interface
Slot 1
PR
5510/04
RS 485/232
Slot 2 -empty-
Slot 3 Builtin Digital I/O Standard interface, digital I/Os
Slot 4
PR
1721/31
Profibus-DP
When you select [Show alibi memory], you can display the selected dataset.
Info/Show alibi memory
Sequencenumber 52 Last entry, can be overwritten
Date 2007-06-01
Time 10:21:45
Grossweight A <751 kg>
Netweight A <1150 kg>
+ - Increase, decrease sequencenumber
Selection is done on the sequence number. For more information please refer to chapter 4.10 .