Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 86)

Section 4: Commissioning
10/08 86 51207 Revision 1
4.7 C ONFIGURING G ENERAL P ARAMETERS
The configuration of parameters which are not related to the weighing electronics is divided into
several sections (see Chapter 4.4.5 ).
4.7.1 Date and Time
Select -[ Date & Time ] to set date and time.
Setup/Clock
Date 2005-08-17 Date and time can be overwritten
Time 16:21:52
4.7.2 Serial Ports
To configure the serial interfaces, press and select [Serial ports parameter].
Setup
Serial ports parameter
Select [Serial ports parameter] with
and
Date & Time
Operating parameter
Printing parameter
Setup/Serial ports
Printer Standard RS232
Remote display Slot1 RS232
JBUS/MOD-Bus Slot2 RS485
SMA
Param
[Printer]
Select the serial interface to which the printer is connected. Select [Param] to define the transfer
characteristics:
Setup/Serial ports/Builtin RS232
Assigned to Printer Press to select the following:
Protocol XON/XOFF
XON/XOFF, RTS/CTS, W&M Printer, no
printer
Baudrate 9600 bd 300, 600, .... 19200, 38400
Bits 7 7, 8
Parity even no, odd, even
Stopbits 1 1, 2
Output mode raw raw, CR/LF translation