Fairbanks X SERIES PR 5410 Process Indicator - Manual (Page 92)

Section 4: Commissioning
10/08 92 51207 Revision 1
4.7.8 Network Parameters
You can configure settings for the network connections (built-in LAN adapter) under -[Network
parameter].
Setup/Network parameter
HW address 00:90:6C:FB:E9:85 Fixed address determined by the instrument
Hostname PR5410-UDOWEIGH Device name; user-definable*
Use DHCP Address is assigned by the server
IP Address 172.24.21.82 Address assigned by the server
Subnetmask 255.255.240.0 Mask for permissible IP address range
Standardgateway 0.0.0.0 IP number for gateway
Remote access
VNC-Client 255.255.255.255
Permissible client for operation of the
instrument
*The [Hostname] is subject to the following restrictions:
Minimum number of characters: 2, maximum number of characters: 24
The first character must be a letter. Spaces are not permitted.
0-9, A-Z (upper and lower case letters are not distinguished) are permitted.
- or . may be included, but neither at the end nor in succession.
When setting [IP address], [Subnet mask] and [Standardgateway], please consult with your network
administrator.
You can configure access permissions for the address specified under [VNC client]:
VNC client
0.0.0.0. Access over VNC not permitted
VNC client 172.24.21.101 Access only from client machine with this address
VNC client 172.24.21.255 Access from any client with address within range 172.24.21.1 to
254
VNC client 255.255.255.255 Access from client with any address