Teledyne 9110E - Nitrogen Oxides Analyzer - Manual (Page 50)

Optional Hardware and Software Model 9110E Instruction Manual
36 M9110E Rev B
accommodate a hand for transport. When pushed in, the handle is flush with the chassis
and protrudes out about 9 mm / 3/8”. Installing the strap handle prevents the use of the
rack mount slides, although the rack mount brackets, Option 21, can still be used. We
caution any user to prevent personal injury when using the strap handle, as the analyzer
without options installed weighs about 17 kg (38 pounds). Make sure to disconnect all
cables and tubing from the analyzer before carrying it.
Figure 5-1: M9110E with Carrying Strap Handle and Rack Mount Brackets
5.4. Current Loop Analog Outputs (Option 41)
This option adds isolated, voltage-to-current conversion circuitry to the analyzer’s analog
outputs. This option may be ordered separately for the first three of the analog outputs and
can be installed at the factory or added later. Call TAI sales for pricing and availability.
The current loop option can be configured for any output range between 0 and 20 mA (for
example 0-20, 2-20 or 4-20 mA). Information on calibrating or adjusting these outputs can
be found in Section 6.7.6.