Teledyne 9110E - Nitrogen Oxides Analyzer - Manual (Page 38)

Getting Started Model 9110E Instruction Manual
24 M9110E Rev B
RANGE
NOX STB
SAMP FLW
OZONE FL
PMT
NORM PMT
AZERO
HVPS
RCELL TEMP
BOX TEMP
PMT TEM
IZS TEMP 1
MOLY TEMP
RCEL
SAMP
NOX SLOPE
NOX OFFS
NO SLOPE
NO OFFS
NO2 2
NOX 2
NO 2
TEST 3
TIME
SAMPLE RANGE = 500.0 PPB NOX = X.X
< TST TST >
CAL SETUP
1
Only appears if IZS option is
installed.
2
Only appears if analyzer is set
to display NO, NO
2
, NO
x
simultaneously in message
field.
3 Only appears if analog autput
A4 is actively reporting a test
function
Refer to
Section
6.2.1 for
definitions
of these
test
functions.
Toggle keys to
scroll through list of functions
Figure 3-11 and Figure 3-12 show the analyzer flow diagrams without and with options
installed. Refer to these diagrams whenever troubleshooting or a thorough understanding of
the analyzer operation is required. Note that valve options for zero/span valves or IZS are
principally the same, except that the span gas stream is connected differently in the
zero/span option.
More detailed pneumatic diagrams for all configurations (base, zero/span valves, IZS,
sample dryer) can be found in Appendix D, diagram number 04574.