Teledyne 9110E - Nitrogen Oxides Analyzer - Manual (Page 101)

Model 9110E Instruction Manual Operating Instructions
M9110E Rev B 87
Step two in the configuration process is to edit the TCP/IP parameters.
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE
EXIT
SETUP X.X SECONDARY SETUP MENU
COMM VARS DIAG EXIT
SAMPLE RANGE = 500.0 PPB O3 =XXX.X
< TST TST > CAL
SETUP
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2
EXIT
INTERNET CONFIGURATION
GTWY IP SNET PORT STRT STOP EXIT
SETUP X.X GATEWAY IP: [0] 00.000.000
INS DEL [0]
ENTR EXIT
Internet Configuration
Keypad Functions
KEY FUNCTION
Moves the cursor one
character to the left.
CH> Moves the cursor one
character to the right.
INS Inserts a character before the
cursor location.
DEL Deletes a character at the
cursor location.
[0] Press this key to cycle
through the range of
numerals and characters
available for insertion.
ENTR Accepts the new setting and
returns to the previous menu.
EXIT Ignores the new setting and
returns to the previous menu.
Some keys only appear as needed.
INTERNET CONFIGURATION
GTWY IP SNET PORT STRT STOP EXIT
SETUP X.X INST IP: [0] 00.000.000
INS DEL [0]
ENTR EXIT
INTERNET CONFIGURATION
GTWY IP SNET PORT STRT STOP EXIT
SETUP X.X SUBNET MASK: [0] 00.000.000
INS DEL [0]
ENTR EXIT
INTERNET CONFIGURATION
GTWY IP SNET PORT STRT STOP EXIT
Cursor location is indicated by brackets
The PORT number
needs to remain at
3000. Do not change
this setting!
Change the cursor value with this button