If you attempt to scan a document with an attachment such as
sticky note, receipt, or photo while multifeed detection is
enabled, the scanner may falsely recognize this as a multifeed
error and stop the scan. To scan these types of documents,
the "Intelligent Multifeed Function" is available.
There are two modes in this function. In one mode, you can
suppress multifeeds forcibly by using the operator panel on
the scanner. In the other mode, you can suppress multifeeds
automatically by letting the scanner memorize the location and
the length of the attachment.

Intelligent Multifeed Function

The following three modes are available:

Select the mode by performing one of the following:



Select the mode in [13: iMFF Setting] on the [Settings Menu] screen
of the operator panel.
For details, refer to

"3.2 Settings Menu" (page 62)



Select the mode in the Software Operation Panel.
For details, refer to

"Specifying an Area Not to Detect Multifeed

[Intelligent Multifeed Function]" (page 204)

4.4 Customizing the Scanner Settings

Sticky Note

Receipt
or Photograph

Document

Mode

Description

Manual mode
(Bypass by front
panel button)

Checks for any paper attached every time a
multifeed occurs, and continues scanning.

Auto mode 1
(Bypass by
combination of
length and position)

Used to scan documents with paper of the same
size attached in the same location.

Auto mode 2
(Bypass by length)

Used to scan documents with paper of the same
size attached in different locations.

ATTENTION

Irregular images may be output when multifeeds occur.