This section explains about the Settings Menu.
When you press the [Menu] button while the [Ready] screen is
displayed, the [Settings Menu] screen is displayed.
The Settings Menu can be used to configure various
operational settings upon scanning.

There are two menus in the [Settings Menu] screen.



User menu
You can configure basic settings for operating the scanner and using
the operator panel.



Administrator menu
You can configure advanced settings for operating the scanner and
using the operator panel.

To switch between the menus, press down both the [



] and

[



] buttons at the same time for three seconds or longer while

the [Settings Menu] screen is displayed.
When the scanner is turned off, the user menu appears.

3.2 Settings Menu