Scanning a book [fi-7700/fi-7700s, Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7700 Document Scanner User Manual
Page 90

Chapter 4 Various Ways to Scan
90
2
In the scanner driver, configure the scan settings to scan
the paper size of the long page.
For details, refer to the scanner driver's Help.
3
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
Scanning a Book [fi-7700/fi-7700S]
1
Open the document cover.
"1.5 Opening/Closing the Document Cover [fi-
.
2
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
ATTENTION
- Removing
Secure enough space around the stacker to prevent the
ejected sheet from falling off the stacker.
HINT
To scan documents longer than A3 size, perform the following:
Pull out the chute extension.
For details, refer to
"1.7 Setting Up the ADF Paper Chute
.
Pull out the stacker extension all the way.
For details, refer to
"1.8 Setting Up the Stacker" (page 30)
.
ATTENTION
If you scan a long page document and split the scanned image into
multiple pages at a lower resolution (less than 400 dpi), the
document is scanned slowly regardless of the resolution setting.
ATTENTION
Note that a curled or folded document may create a small gap
between the document and the document bed, causing the
scanned image to be blurred.
Reference
Point