Select a paper protection detection method.
This function can reduce the risk of having the
documents damaged by detecting a feeding error
and stopping the scan in the following cases:



When the scanner detects a document that was
unusually warped by a feeding error



When the scanner detects paper jam noise



When the scanner either detects a document
that was unusually warped by a feeding error or
detects paper jam noise

Specify the sensitivity level to detect anomalies
upon feeding the documents when paper
protection is enabled.
Documents are deformed (for example, warped) or
paper jam noise is made when documents are not
being fed by the rollers properly. To detect such
symptoms and stop the scan, select [1: Low] to
only detect documents that are highly deformed or
loud paper jam noise. To detect documents that are
slightly deformed or small paper jam noise, select
[3: High].
You can also configure the paper protection
detection method from the scanner driver or the
Software Operation Panel. When the operator
panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation
Panel setting. Note that even if the operator panel
setting is prioritized, the scanner driver setting has
the highest priority.
You can also configure the sensitivity level to
detect warped documents and paper jam noise
from the Software Operation Panel. When the
operator panel setting is prioritized, the operator
panel setting is prioritized over the Software
Operation Panel setting.

1: Disable
2: Feeding accuracy
3: Feeding noise
4: Feeding accuracy and noise

Sensitivity for feeding accuracy:
1: Low
2: Normal
3: High

Sensitivity for feeding noise:
1: Low
2: Normal
3: High

2: Feeding
accuracy

Sensitivity
for feeding
accuracy:
2: Normal

Sensitivity
for feeding
noise:
2: Normal

Item

Description

Parameter (*1)/Value

Factory

Default

(*2)

-: No parameters/values